Proper Weighting For Buoyancy Control Guidlines - Powered By Kayako SupportSuite

09 Sep 2010

Support Center » Knowledgebase » Proper Weighting For Buoyancy Control Guidlines

	Proper Weighting For Buoyancy Control Guidlines

Solution Guidelines for Proper Weighting. We all know that most new divers tend to need a bit more weight than seasoned ones because Buoyancy Control takes several dives to master. I have over 3000 and still have a challenge every once in a while. Here is the best rule of thumb for weighting that I have found:

FRESH Water:

Swimsuit or DiveSkin- Begin with 1 to 4 pounds / 0.5/2kg

Thin 3mm wetsuits or Shorty- 5% of your Body Weight

Medium Thickness 5mm suits- 10% of your Body Weight

Cold Water 7mm with hood/gloves- 10% of your Body Weight plus 3-5 pounds / 1.5/3kg

Neoprene Drysuit- 10% of your Body Weight plus 7-10 pounds / 3-5kg

Shell Style Dry Suits w/o under garment - 10% of your Body Weight plus 3-5 pounds / 1.5/3kg

Shell Style Dry Suits w/ heavy under garment - 10% of your Body Weight plus 7-14 pounds / 3-7kg

The undergarments vary quite a bit as they can realy add allot surface area to you thus increasing the amount of weight needed to stay neutrally buoyant.

Salt Water Diving (add to above calculations for Fresh Water)

100 to 125 lb (45-56kg) add 4 pounds (2kg)
126 to 155 lb (57-70kg) add 5 pounds (2.3kg)
156 to 186 lb (71-85kg) add 6 pounds (3kg)
187 to 217 lb (86-99kg) add 7 pounds (3.2kg)

Always do a buoyancy check before beginning your dive and also factor in that if you are diving with an aluminum 80 tank you will need to add a little more to compesate for the tank toward the end of the dive. If you are diving with a steel tank the same holds true except you will need less weight. That is why it is so important to perform a neutral buoyancy check before beginning your dive.

Article Details

Article ID:

Created On:

15 Dec 2007 04:59 PM